Vector Probe

The Vector probe is a device dedicated to measuring paraglider performance. The two main parameters measured are:

Air speed (IAS and TAS);
Glide angle (glide ratio).

These measurements are in the air reference frame and datas are normalized for a standard atmosphere in order to allow comparisons under different meteorological conditions.
A measurement point takes less than a minute, so it is possible to obtain the whole of the wing’s polar on a simple ballistic flight.
The probe can also be used to measure and optimize its position in the harness.

Process a flight

You have made a flight and you want to convert the raw probe file into physical data.

Access to the application >>

Check your probe

You have performed a static calibration and you want to check your probe.

Check your probe >>

Analysis tool

You have a file containing physical data and you want to extract the polar.

Access the tool>>